Man Seiten exportieren

Um eine reine Textversion einer man Seite ohne Rücktasten und Unterstriche zu erhalten, versuchen Sie:

man foo | col -bx > foo.txt

Oder kopieren Sie es stattdessen.

man foo | col -bx | pbcopy

Für eine Zwischenablage unter Linux müssen Sie eventuell folgendes hinzufügen:

# with xsel
alias pbcopy='xsel --clipboard --input'
alias pbpaste='xsel --clipboard --output'

# or with xclip:
alias pbcopy='xclip -selection clipboard'
alias pbpaste='xclip -selection clipboard -o'

Umwandlung von HTML-Zeichen

Sie können dies in Ihre .zshrc/.bashrc/etc. einsetzen.

escape_html () {
  sed 's/&/\&amp;/g; s/</\&lt;/g; s/>/\&gt;/g; s/"/\&quot;/g; s/'"'"'/\&#39;/g'

Dann können Sie es innerhalb der Pipe einsetzen.

man foo | col -bx | escape_html | pbcopy

Dies ermöglicht es die Ausgabe in <pre> Tags zu wickeln.

man(1)                                                                  man(1)

       man - format and display the on-line manual pages

       man  [-acdfFhkKtwW]  [--path]  [-m system] [-p string] [-C config_file]
       [-M pathlist] [-P pager] [-B browser] [-H htmlpager] [-S  section_list]
       [section] name ...

       man formats and displays the on-line manual pages.  If you specify sec-
       tion, man only looks in that section of the manual.  name  is  normally
       the  name of the manual page, which is typically the name of a command,
       function, or file.  However, if name contains  a  slash  (/)  then  man
       interprets  it  as a file specification, so that you can do man ./foo.5
       or even man /cd/foo/bar.1.gz.

       See below for a description of where man  looks  for  the  manual  page

       -C  config_file
              Specify  the  configuration  file  to  use; the default is /pri-
              vate/etc/man.conf.  (See man.conf(5).)

       -M  path
              Specify the list of directories to search for man pages.   Sepa-
              rate  the directories with colons.  An empty list is the same as
              not specifying -M at all.  See SEARCH PATH FOR MANUAL PAGES.

       -P  pager
              Specify which pager to use.  This option overrides the  MANPAGER
              environment  variable,  which  in turn overrides the PAGER vari-
              able.  By default, man uses /usr/bin/less -is.

       -B     Specify which browser to use on HTML files.  This  option  over-
              rides  the  BROWSER  environment  variable. By default, man uses

       -H     Specify a command that renders HTML files as text.  This  option
              overrides  the  HTMLPAGER  environment variable. By default, man
              uses /bin/cat,

       -S  section_list
              List is a colon separated list of  manual  sections  to  search.
              This option overrides the MANSECT environment variable.

       -a     By default, man will exit after displaying the first manual page
              it finds.  Using this option forces man to display all the  man-
              ual pages that match name, not just the first.

       -c     Reformat  the  source man page, even when an up-to-date cat page
              exists.  This can be meaningful if the cat  page  was  formatted
              for  a screen with a different number of columns, or if the pre-
              formatted page is corrupted.

       -d     Don't actually display the man  pages,  but  do  print  gobs  of
              debugging information.

       -D     Both display and print debugging info.

       -f     Equivalent to whatis.

       -F or --preformat
              Format only - do not display.

       -h     Print a help message and exit.

       -k     Equivalent to apropos.

       -K     Search  for  the  specified  string in *all* man pages. Warning:
              this is probably very slow!  It  helps  to  specify  a  section.
              (Just  to  give  a  rough idea, on my machine this takes about a
              minute per 500 man pages.)

       -m  system
              Specify an alternate set of man pages to  search  based  on  the
              system name given.

       -p  string
              Specify  the  sequence  of  preprocessors to run before nroff or
              troff.  Not all installations will have a full set of preproces-
              sors.   Some of the preprocessors and the letters used to desig-
              nate them are: eqn (e), grap (g), pic (p), tbl (t), vgrind  (v),
              refer  (r).   This  option  overrides the MANROFFSEQ environment

       -t     Use /usr/bin/groff -Tps -mandoc -c to format  the  manual  page,
              passing  the  output  to  stdout.   The default output format of
              /usr/bin/groff -Tps -mandoc -c is Postscript, refer to the  man-
              ual  page  of /usr/bin/groff -Tps -mandoc -c for ways to pick an
              alternate format.

       Depending on the selected  format  and  the  availability  of  printing
       devices,  the  output  may  need  to  be  passed through some filter or
       another before being printed.

       -w or --path
              Don't actually display the man pages, but  do  print  the  loca-
              tion(s) of the files that would be formatted or displayed. If no
              argument is given: display (on stdout) the list  of  directories
              that  is  searched by man for man pages. If manpath is a link to
              man, then "manpath" is equivalent to "man --path".

       -W     Like -w, but print file names one per line,  without  additional
              information.   This is useful in shell commands like man -aW man
              | xargs ls -l

       Man will try to save the formatted man pages, in order to save  format-
       ting time the next time these pages are needed.  Traditionally, format-
       ted versions of pages in DIR/manX are saved in DIR/catX, but other map-
       pings   from   man   dir   to   cat  dir  can  be  specified  in  /pri-
       vate/etc/man.conf.  No cat pages are saved when the required cat direc-
       tory  does  not  exist.  No cat pages are saved when they are formatted
       for a line length different from 80.   No  cat  pages  are  saved  when
       man.conf contains the line NOCACHE.

       It is possible to make man suid to a user man. Then, if a cat directory
       has owner man and mode 0755 (only writable by man), and the  cat  files
       have  owner  man  and  mode  0644 or 0444 (only writable by man, or not
       writable at all), no ordinary user can change  the  cat  pages  or  put
       other  files  in the cat directory. If man is not made suid, then a cat
       directory should have mode 0777 if all users should be  able  to  leave
       cat pages there.

       The  option  -c  forces  reformatting a page, even if a recent cat page

       Man will find HTML pages if they live in directories named as  expected
       to  be  ".html", thus a valid name for an HTML version of the ls(1) man
       page would be /usr/share/man/htmlman1/ls.1.html.

       man uses a sophisticated method of finding manual page files, based  on
       the   invocation   options   and   environment   variables,  the  /pri-
       vate/etc/man.conf configuration file, and some built in conventions and

       First  of  all, when the name argument to man contains a slash (/), man
       assumes it is a file specification itself, and there  is  no  searching

       But in the normal case where name doesn't contain a slash, man searches
       a variety of directories for a file that could be a manual page for the
       topic named.

       If  you  specify  the -M pathlist option, pathlist is a colon-separated
       list of the directories that man searches.

       If you don't specify -M but set the MANPATH environment  variable,  the
       value  of  that  variable  is  the  list  of  the  directories that man

       If you don't specify an explicit path list  with  -M  or  MANPATH,  man
       develops  its  own path list based on the contents of the configuration
       file /private/etc/man.conf.  The MANPATH statements in  the  configura-
       tion  file  identify  particular  directories  to include in the search

       Furthermore, the MANPATH_MAP statements add to the search path  depend-
       ing  on your command search path (i.e. your PATH environment variable).
       For each directory that may be in  the  command  search  path,  a  MAN-
       PATH_MAP  statement  specifies  a directory that should be added to the
       search path for manual page files.  man looks at the PATH variable  and
       adds the corresponding directories to the manual page file search path.
       Thus, with the proper use of MANPATH_MAP, when you  issue  the  command
       man  xyz,  you  get a manual page for the program that would run if you
       issued the command xyz.

       In addition, for each directory in the command search path (we'll  call
       it  a  "command  directory")  for  which  you do not have a MANPATH_MAP
       statement, man automatically looks for a manual page directory "nearby"
       namely as a subdirectory in the command directory itself or in the par-
       ent directory of the command directory.

       You can disable the automatic "nearby" searches by  including  a  NOAU-
       TOPATH statement in /private/etc/man.conf.

       In  each  directory in the search path as described above, man searches
       for a file named topic.section, with an optional suffix on the  section
       number  and  possibly  a compression suffix.  If it doesn't find such a
       file, it then looks in any subdirectories named manN or catN where N is
       the  manual section number.  If the file is in a catN subdirectory, man
       assumes it is a formatted manual page file (cat page).  Otherwise,  man
       assumes it is unformatted.  In either case, if the filename has a known
       compression suffix (like .gz), man assumes it is gzipped.

       If you want to see where (or if) man would find the manual page  for  a
       particular topic, use the --path (-w) option.

              If  MANPATH is set, man uses it as the path to search for manual
              page files.  It overrides the configuration file and  the  auto-
              matic  search  path,  but  is  overridden  by  the -M invocation
              option.  See SEARCH PATH FOR MANUAL PAGES.

       MANPL  If MANPL is set, its value is used as the display  page  length.
              Otherwise, the entire man page will occupy one (long) page.

              If  MANROFFSEQ is set, its value is used to determine the set of
              preprocessors run before running nroff or  troff.   By  default,
              pages are passed through the tbl preprocessor before nroff.

              If  MANSECT  is set, its value is used to determine which manual
              sections to search.

              If MANWIDTH is set, its value is  used  as  the  width  manpages
              should  be displayed.  Otherwise the pages may be displayed over
              the whole width of your screen.

              If MANPAGER is set, its value is used as the name of the program
              to  use to display the man page.  If not, then PAGER is used. If
              that has no value either, /usr/bin/less -is is used.

              The name of a browser to use for displaying HTML  manual  pages.
              If it is not set, /usr/bin/less -is is used.

              The  command to use for rendering HTML manual pages as text.  If
              it is not set, /bin/cat is used.

       LANG   If LANG is set, its value defines the name of  the  subdirectory
              where  man first looks for man pages. Thus, the command `LANG=dk
              man 1 foo' will cause man to  look  for  the  foo  man  page  in
              .../dk/man1/foo.1,  and  if  it cannot find such a file, then in
              .../man1/foo.1, where ... is a directory on the search path.

              The environment variables NLSPATH and LC_MESSAGES (or LANG  when
              the  latter  does not exist) play a role in locating the message
              catalog.  (But the English messages are  compiled  in,  and  for
              English no catalog is required.)  Note that programs like col(1)
              called by man also use e.g. LC_CTYPE.

       PATH   PATH helps determine the search path for manual page files.  See

       SYSTEM SYSTEM is used to get the default alternate system name (for use
              with the -m option).

       The -t option only works if a troff-like program is installed.
       If you see blinking  \255  or  <AD>  instead  of  hyphens,  put  `LESS-
       CHARSET=latin1' in your environment.

       If you add the line

         (global-set-key  [(f1)]  (lambda () (interactive) (manual-entry (cur-

       to your .emacs file, then hitting F1 will give you the man page for the
       library call at the current cursor position.

       To  get  a  plain  text  version  of a man page, without backspaces and
       underscores, try

         # man foo | col -b > foo.mantxt

       John W. Eaton was the  original  author  of  man.   Zeyd  M.  Ben-Halim
       released  man  1.2,  and  Andries Brouwer followed up with versions 1.3
       thru 1.5p.  Federico  Lucifredi  <>  is  the  current

       apropos(1), whatis(1), less(1), groff(1), man.conf(5).

                              September 19, 2005                        man(1)